Volumetric passive infrared sensor IRA15P PET IMMUNITY

VAT-inclusive price
39.38EUR

323 Raccolta Punti

Passive infrared detector equipped with digital signal processing Fresnel lens flat (cylindrical)

Pet immunity: the detector can be programmed (by jumper) to discriminate animals weighing less than 18KG (15m range) or a weight less than 35KG (12m range).
 
 
IRA 15P COD. 80IR6B00211

FEATURES

Pet immunity: the detector can be programmed (by jumper) to discriminate animals weighing less than 18KG (15m range) or a weight less than 35KG (12m range)
Capacity: 12/15 m nominal
IR coverage: 88.5 °
Sensitive areas: 52 of 11 floors
Protected PIR: The PIR sensitive element is completely protected from disturbances due to insects and / or air drafts which might generate false alarms
Protection halogen light: The lens coloring prevents false alarms that may be generated if the sensitive element be hit by white light rays
Memory of alarm: In case of detection (system is on) the LED of the detector, steady light to indicate the alarm memory
Displaying fault state: the detector is able to detect fault situations
of the infrared and displays by the flashing LED
Control of stand-by time: using this input the detector is informed on the state (on or off). You can then program the detector so that this information can not block the alarm relay and the LED indicator
Inhibition alarm relay: Possibility of programming the alarm output so that it is inhibited when the detector is in "stand-by"
Automatic temperature compensation: The detector is equipped with the automatic compensation bidirectional, ie when the ambient temperature increases and approaches the temperature of the human body involves a lowering of the intervention threshold; when the ambient temperature exceeds that of the human body the threshold increases again.
Walk test: the revelation of the detector is indicated by the LED (can be disabled)
Pre-alarm function: the approach of the alarm threshold is indicated by the flashing LED, while achieving the same is indicated by continuous illumination.
 
  • Operating Voltage min-max: 9-15 Vdc
  • Rated supply voltage: 12 Vdc
  • Absorption at 12Vdc: 10.5 mA nom., 13 mA max
  • Pulse Count: X1/X2
  • Alarm Relay: solid state relay NC 100 mA @ 24 Vdc / Rmax = 35 ohms
  • Tamper: 50 mA @ 24 Vdc
  • Operating temperature: -10 ° C / +55 ° C (manufacturer's declared value) +5 ° C to +40 ° C (certified according to IEC)
  • Performance level: Level I / II level with joint SPA10 and Tamper Kit
  • Dimensions (H x W x D): 85 x 70 x 54 mm
  • Weight: 80 g

Categories

Manufacturers